Waterjet Blasting Machines

Product Details:

High Pressure Water Blasting Machines can effectively remove a wide variety of tough dirt in difficult-to-reach points or locations in a safe and efficient manner. In fact, the results are comparable to those of cleaning techniques that use abrasives and cleaning agents, but without the dust and other health hazards, which allows the workers to focus on their daily tasks in a health-friendly workplace environment.

We Lynx Pressure System are manufacturer of High Pressure Water Blasting Machines & Equipment in Ahmedabad; Gujarat; India.

We also export Water Hydro Blasting Machines to many countries such as UAE, South Africa and many more......

Pressure Range - 350 Bar to 1400 Bar
Flow Range - 15 LPM to 139 LPM

Features:

• Robust Construction
• Few Moving Parts
• Low and Easy Maintenance
• Simple and Comfortable Design
• Easy Installation
• Volumetric Efficiency 95% (maximum)
• Independent alloy steel high wear resistance cylinder
• Compulsory lubrication system
• Plunger core automatic regulate device
• Super-hard alloy or ceramic plunger
• All-in-one transmission case
• Equipped with protection unit for phase failure and over charge
• Intake pressure and lubricant pressure warning device

Applications:

• High Pressure Cleaning
• Tank & Vessel Cleaning
• Hydro Blasting
• Hydro demolition
• Paint Removal
• Ship Hull Cleaning
• Heat Exchanger-Condenser-Boiler-Evaporator Tube & Surface Cleaning
• Surface Preparation
• Textile Industrial Work for Humidification
• Clean and test pressure of petrol pipeline, chemical container, reaction kettle, and heat exchanger by salt work
• Pharmaceutical factory and concrete removal and roughening
• Remove sand, oil, rust, colloid, paint and dirty stuff of castings
• Remove bread crust in rotary kiln of cement plant

Additional Information:

• Item Code: HAWK_LYNX-Pumps
• Production Capacity: 25
• Delivery Time: For HAWK Pumps - 1 Week, For LYNX Pumps - 3-4 Weeks
• Packaging Details: Wooden box with plastic wrapping, Export packaging, As per client demand

Product Details:

Water blasting is not a form of abrasive blasting as no abrasive media is used. Water-blasting, commonly known as hydro blasting, is commonly used because it usually requires only one operator. In water-blasting, a highly pressured stream of water is used to remove old paint, chemicals, or buildup without damaging the original surface. This method is ideal for cleaning internal and external surfaces because the operator is generally able to send the stream of water into places that are difficult to reach using other methods. Another benefit of hydro blasting is the ability to recapture and reuse the water, reducing waste and mitigating environmental impact.

We Lynx Pressure System are manufacturer of Water Blasting Machine in India.

We also export Hydro Blasting Machine to many countries such as UAE, South Africa and many more......

Pressure Range - 350 Bar to 1400 Bar
Flow Range - 15 LPM to 139 LPM

Features:

• Robust Construction
• Few Moving Parts
• Low and Easy Maintenance
• Simple and Comfortable Design
• Easy Installation
• Volumetric Efficiency 95% (maximum)
• Independent alloy steel high wear resistance cylinder
• Compulsory lubrication system
• Plunger core automatic regulate device
• Super-hard alloy or ceramic plunger
• All-in-one transmission case
• Equipped with protection unit for phase failure and over charge
• Intake pressure and lubricant pressure warning device

 Applications:

• High Pressure Cleaning
• Tank & Vessel Cleaning
• Hydro Blasting
• Hydro demolition
• Paint Removal
• Ship Hull Cleaning
• Heat Exchanger-Condenser-Boiler-Evaporator Tube & Surface Cleaning
• Surface Preparation
• Textile Industrial Work for Humidification
• Clean and test pressure of petrol pipeline, chemical container, reaction kettle, and heat exchanger by salt work
• Pharmaceutical factory and concrete removal and roughening
• Remove sand, oil, rust, colloid, paint and dirty stuff of castings
• Remove bread crust in rotary kiln of cement plant

Additional Information:

• Item Code: HAWK_LYNX_Pumps
• Production Capacity: 65
• Delivery Time: Tantative
• Packaging Details: Wooden boxes with plastic wrapping, Export packaging, As per client demand

Product Details:

High Pressure Water Jet Blasting Machine can effectively remove a wide variety of tough dirt in difficult-to-reach points or locations in a safe and efficient manner. In fact, the results are comparable to those of cleaning techniques that use abrasives and cleaning agents, but without the dust and other health hazards, which allows the workers to focus on their daily tasks in a health-friendly workplace environment.

We Lynx Pressure System are manufacturer of High Pressure Water Jet Blasting Machine in Ahmedabad; Gujarat; India.

We also export Hydro Blasting Machine to many countries such as UAE, South Africa and many more......

Pressure Range - 350 Bar to 1400 Bar
Flow Range - 15 LPM to 139 LPM

Features:

• Robust Construction
• Few Moving Parts
• Low and Easy Maintenance
• Simple and Comfortable Design
• Easy Installation
• Volumetric Efficiency 95% (maximum)
• Independent alloy steel high wear resistance cylinder
• Compulsory lubrication system
• Plunger core automatic regulate device
• Super-hard alloy or ceramic plunger
• All-in-one transmission case
• Equipped with protection unit for phase failure and over charge
• Intake pressure and lubricant pressure warning device

Applications:

• High Pressure Cleaning
• Tank & Vessel Cleaning
• Hydro Blasting
• Hydro demolition
• Paint Removal
• Ship Hull Cleaning
• Heat Exchanger-Condenser-Boiler-Evaporator Tube & Surface Cleaning
• Surface Preparation
• Textile Industrial Work for Humidification
• Clean and test pressure of petrol pipeline, chemical container, reaction kettle, and heat exchanger by salt work
• Pharmaceutical factory and concrete removal and roughening
• Remove sand, oil, rust, colloid, paint and dirty stuff of castings
• Remove bread crust in rotary kiln of cement plant

Additional Information:

• Item Code: HAWK_LYNXPumps
• Production Capacity: 75
• Delivery Time: Tantative
• Packaging Details: Wooden box with plastic wrapping, Export Packaging, As per client demand

Product Details:

Hydro-blasting, commonly known as water blasting, is commonly used because it usually requires only one operator. In hydro blasting, a highly pressured stream of water is used to remove old paint, chemicals, or buildup without damaging the original surface. This method is ideal for cleaning internal and external surfaces because the operator is generally able to send the stream of water into places that are difficult to reach using other methods. Another benefit of hydro-blasting is the ability to recapture and reuse the water, reducing waste and mitigating environmental impact.

We Lynx Pressure System are manufacturer of Hydro Blasting Machine in India.

We also export Hydro Blasting Machine to many countries such as UAE, South Africa and many more......

Pressure Range - 350 Bar to 1400 Bar
Flow Range - 15 LPM to 139 LPM

Features:

• Robust Construction
• Few Moving Parts
• Low and Easy Maintenance
• Simple and Comfortable Design
• Easy Installation
• Volumetric Efficiency 95% (maximum)
• Independent alloy steel high wear resistance cylinder
• Compulsory lubrication system
• Plunger core automatic regulate device
• Super-hard alloy or ceramic plunger
• All-in-one transmission case
• Equipped with protection unit for phase failure and over charge
• Intake pressure and lubricant pressure warning device

Applications:

• High Pressure Cleaning
• Tank & Vessel Cleaning
• Hydro Blasting
• Hydro demolition
• Paint Removal
• Ship Hull Cleaning
• Heat Exchanger-Condenser-Boiler-Evaporator Tube & Surface Cleaning
• Surface Preparation
• Textile Industrial Work for Humidification
• Clean and test pressure of petrol pipeline, chemical container, reaction kettle, and heat exchanger by salt work
• Pharmaceutical factory and concrete removal and roughening
• Remove sand, oil, rust, colloid, paint and dirty stuff of castings
• Remove bread crust in rotary kiln of cement plant

Additional Information:

• Item Code: HAWK_LYNX
• Port of Dispatch: All over India, Pipavav, Mundra, Mumbai, Kandla,
• Production Capacity: 65
• Delivery Time: 3-4 Week, Tantative
• Packaging Details: Wooden box with plastic wrapping, Export packaging, As per client demand.

Product Details:

High Pressure Hydro Blasting Pump is a technique for cleaning internal and external surfaces, which relies entirely on the sheer force of water from a pressurized source to achieve the desired cleaning effect on the intended surface. Abrasives, toxic and potentially harmful chemicals are not used in water blast cleaning systems.

Hydro Blasting Machine Model Selection:

Applications:

• Tank & Vessel Cleaning
• Hydro Blasting
• Hydro demolition
• Ship Hull Cleaning
• Heat Exchanger-Condenser-Boiler-Evaporator Tube & Surface Cleaning
• Surface Preparation
• Clean and test pressure of petrol pipeline, chemical container, reaction kettle, and heat exchanger by salt work

Additional Information:

• Item Code: HAWK-LYNX-Pressure-Pumps
• Port of Dispatch: All over India
• Production Capacity: 75
• Delivery Time: For HAWK Pumps: 1-2 Weeks, For LYNX Pumps: 6-8 Weeks
• Packaging Details: Wooden boxes with bubble plastic wrapping, Export packaging, As per client demand.

Product Details:

Pressure blasting, commonly known as water (hydro) blasting, is commonly used because it usually requires only one operator. In hydro blasting, a highly pressured stream of water is used to remove old paint, chemicals, or buildup without damaging the original surface. This method is ideal for cleaning internal and external surfaces because the operator is generally able to send the stream of water into places that are difficult to reach using other methods. Another benefit of hydro-blasting is the ability to recapture and reuse the water, reducing waste and mitigating environmental impact.

We Lynx Pressure System are manufacturer of High Pressure Blasting Machine in Ahmedabad; Gujarat; India.

We also export Hydro Water Blasting Machines to many countries such as UAE, South Africa and many more...

HAWK Pump model selection chart:

 

Applications:

• High Pressure Cleaning
• Tank & Vessel Cleaning
• Hydro Blasting
• Hydro demolition
• Paint Removal
• Ship Hull Cleaning
• Heat Exchanger-Condenser-Boiler-Evaporator Tube & Surface Cleaning
• Surface Preparation
• Textile Industrial Work for Humidification
• Clean and test pressure of petrol pipeline, chemical container, reaction kettle, and heat exchanger by salt work
• Pharmaceutical factory and concrete removal and roughening
• Remove sand, oil, rust, colloid, paint and dirty stuff of castings
• Remove bread crust in rotary kiln of cement plant

Additional Information:

• Production Capacity: 75
• Delivery Time: 1 Week
• Packaging Details: Wooden box with plastic wrapping, Export Packaging, As per client demand

Product Details:

Ultra High Pressure Water Blasting Machines can effectively remove a wide variety of tough dirt in difficult-to-reach points or locations in a safe and efficient manner. In fact, the results are comparable to those of cleaning techniques that use abrasives and cleaning agents, but without the dust and other health hazards, which allows the workers to focus on their daily tasks in a health-friendly workplace environment.

We Lynx Pressure System are manufacturer of High Pressure Water Blasting Machines in Ahmedabad; Gujarat; India.

We also export Water Blasting Machine to many countries such as UAE, South Africa and many more....

Pressure Range - 350 Bar to 1400 Bar
Flow Range - 15 LPM to 139 LPM

Features:

• Robust Construction
• Few Moving Parts
• Low and Easy Maintenance
• Simple and Comfortable Design
• Easy Installation
• Volumetric Efficiency 95% (maximum)
• Independent alloy steel high wear resistance cylinder
• Compulsory lubrication system
• Plunger core automatic regulate device
• Super-hard alloy or ceramic plunger
• All-in-one transmission case
• Equipped with protection unit for phase failure and over charge
• Intake pressure and lubricant pressure warning device

Applications:

• High Pressure Cleaning
• Tank & Vessel Cleaning
• Hydro Blasting
• Hydro demolition
• Paint Removal
• Ship Hull Cleaning
• Heat Exchanger-Condenser-Boiler-Evaporator Tube & Surface Cleaning
• Surface Preparation
• Textile Industrial Work for Humidification
• Clean and test pressure of petrol pipeline, chemical container, reaction kettle, and heat exchanger by salt work
• Pharmaceutical factory and concrete removal and roughening
• Remove sand, oil, rust, colloid, paint and dirty stuff of castings
• Remove bread crust in rotary kiln of cement plant

Additional Information:

• Item Code: HAWK-LYNX-Pumps
• Production Capacity: 75
• Delivery Time: Tantative, For HAWK Pump - 10 Days, For LYNX Pump - 4-6 Weeks
• Packaging Details: Wooden boxes with bubble plastic wrapping, Export Packaging, As per client demand

Product Details:

Water Jet Blasting Machine can effectively remove a wide variety of tough dirt in difficult-to-reach points or locations in a safe and efficient manner. In fact, the results are comparable to those of cleaning techniques that use abrasives and cleaning agents, but without the dust and other health hazards, which allows the workers to focus on their daily tasks in a health-friendly workplace environment.

We Lynx Pressure System are manufacturer of Water Jet Blasting Machines in Ahmedabad; Gujarat; India.

We also export Hydro Blasting Machine to many countries such as UAE, South Africa and many more....

HAWK Pump PXI model selection chart:

 Water Blasting Cleaning Applications:

• High Pressure Cleaning
• Tank & Vessel Cleaning
• Hydro Blasting
• Hydro demolition
• Paint Removal
• Ship Hull Cleaning
• Heat Exchanger-Condenser-Boiler-Evaporator Tube & Surface Cleaning
• Surface Preparation
• Textile Industrial Work for Humidification
• Clean and test pressure of petrol pipeline, chemical container, reaction kettle, and heat exchanger by salt work
• Pharmaceutical factory and concrete removal and roughening
• Remove sand, oil, rust, colloid, paint and dirty stuff of castings
• Remove bread crust in rotary kiln of cement plant

Additional Information:

• Item Code: PXI-15-21.500
• Production Capacity: 75
• Delivery Time: 1 Week
• Packaging Details: Wooden box with plastic wrapping, Export packaging, As per client demand

Product Details:

Water blast cleaning machine is a technique for cleaning internal and external surfaces, which relies entirely on the sheer force of water from a pressurized source to achieve the desired cleaning effect on the intended surface. Abrasives, toxic and potentially harmful chemicals are not used in water blast cleaning systems.

We Lynx Pressure System are manufacturer of High Pressure Water Blast Cleaning Machines in Ahmedabad; Gujarat; India.

We also export Water Hydro Blasting Machines to many countries such as UAE, South Africa and many more......

Pressure Range - 350 Bar to 1400 Bar
Flow Range - 15 LPM to 139 LPM

Features:

• Robust Construction
• Few Moving Parts
• Low and Easy Maintenance
• Simple and Comfortable Design
• Easy Installation
• Volumetric Efficiency 95% (maximum)
• Independent alloy steel high wear resistance cylinder
• Compulsory lubrication system
• Plunger core automatic regulate device
• Super-hard alloy or ceramic plunger
• All-in-one transmission case
• Equipped with protection unit for phase failure and over charge
• Intake pressure and lubricant pressure warning device

Applications:

• High Pressure Cleaning
• Tank & Vessel Cleaning
• Hydro Blasting
• Hydro demolition
• Paint Removal
• Ship Hull Cleaning
• Heat Exchanger-Condenser-Boiler-Evaporator Tube & Surface Cleaning
• Surface Preparation
• Textile Industrial Work for Humidification
• Clean and test pressure of petrol pipeline, chemical container, reaction kettle, and heat exchanger by salt work
• Pharmaceutical factory and concrete removal and roughening
• Remove sand, oil, rust, colloid, paint and dirty stuff of castings
• Remove bread crust in rotary kiln of cement plant

Additional Information:

• Item Code: HAWK_LYNX_Series
• Production Capacity: 15-65
• Delivery Time: Tantative
• Packaging Details: Wooden box with plastic wrapping, Export packaging, As per client demand.

Product Details:

Hydro-blasting Equipment is a technique for cleaning internal and external surfaces, which relies entirely on the sheer force of water from a pressurized source to achieve the desired cleaning effect on the intended surface. Abrasives, toxic and potentially harmful chemicals are not used in water blast cleaning systems.

We Lynx Pressure System are manufacturer of High Pressure Hydroblasting Equipment in Ahmedabad; Gujarat; India.

We also export Hydro Blasting Machines to many countries such as UAE, South Africa and many more......

Pressure Range - 350 Bar to 1400 Bar
Flow Range - 15 LPM to 139 LPM

Features:

• Robust Construction
• Few Moving Parts
• Low and Easy Maintenance
• Simple and Comfortable Design
• Easy Installation
• Volumetric Efficiency 95% (maximum)
• Independent alloy steel high wear resistance cylinder
• Compulsory lubrication system
• Plunger core automatic regulate device
• Super-hard alloy or ceramic plunger
• All-in-one transmission case
• Equipped with protection unit for phase failure and over charge
• Intake pressure and lubricant pressure warning device

Applications:

• High Pressure Cleaning
• Tank & Vessel Cleaning
• Hydro Blasting
• Hydro demolition
• Paint Removal
• Ship Hull Cleaning
• Heat Exchanger-Condenser-Boiler-Evaporator Tube & Surface Cleaning
• Surface Preparation
• Textile Industrial Work for Humidification
• Clean and test pressure of petrol pipeline, chemical container, reaction kettle, and heat exchanger by salt work
• Pharmaceutical factory and concrete removal and roughening
• Remove sand, oil, rust, colloid, paint and dirty stuff of castings
• Remove bread crust in rotary kiln of cement plant

Additional Information:

• Item Code: HAWK-LYNX_Pumps
• Production Capacity: 45
• Delivery Time: For HAWK Pump - 1-2 Weeks, For LYNX Pump - 6-7 Weeks
• Packaging Details: Wooden box with bubble plastic wrapping, Export packaging, As per client demand